savemop.blogg.se - Asus intel extreme tuning utility watchdog

#Asus intel extreme tuning utility watchdog drivers#
#Asus intel extreme tuning utility watchdog pro#
#Asus intel extreme tuning utility watchdog software#
#Asus intel extreme tuning utility watchdog Pc#

Step Four: System Stability and Stress Testing Once you have made an adjustment, click the yellow “Apply” button in the Intel® XTU interface. Remember to make any adjustments slowly, and never to change more than one setting at a time.

You likely won’t damage your CPU by adjusting other settings due to built-in safety features, but unless you know exactly what these settings do and how they will impact your CPU, sticking with those three fundamentals might be best. The Advanced Tuning section provides many settings you can experiment with, but if you’re new to overclocking, the primary settings to focus on are the Processor Core Ratio, Processor Cache Ratio, and potentially the Core Voltage. This means that if you set the Vcore to 1.1V, and then add an offset of +0.2V, you will be effectively applying a Vcore of 1.3 volts.

Both “Core Voltage” and “Core Voltage Offset” sliders are added together when applied.

If you want to change the CPU Vcore (core voltage) to a specific value, simply select it with the “Core Voltage” slider.

When changing these settings, it’s best not to exceed changes of 0.05V at a time. This will add your current Vcore to the value selected. If you don’t know your default Vcore but still want to increase it, you can use the “Core Voltage Offset” slider. These can be increased in order to keep up with higher core ratios if you are encountering system instability. For a CPU to run at faster speeds, it might require more power in order to remain stable, which is where adjusting the Vcore becomes important. ( I use a large liquid cooler from Corsair which seems to work really well.Another section allows you to adjust the Vcore (Core Voltage). It was not down to CPU temp - there was no throttling evident and stress tests showed that it never got hotter than 70C. Do any of you guys overclock ? It could be an instability at higher speeds. All has been rock solid for 2 weeks now, so I think that was the problem. So I created my own overclocking profile which maxed out at 4.5GHz rather than the 4.6 GHz produced by the wizard. I tried a few times and it was the same every time. Removed the overclocking and all was well. Then I applied the overclocking and bam - Lightroom failed immediately.

#Asus intel extreme tuning utility watchdog Pc#

The MOBO and graphics cards came back 'no fault found' and when I rebuilt the PC all worked fine for several days. It was a profile created by the 'Wizard ' in the BIOS. Well, bizarre as this may sound the problem with Lightroom was caused by an instability with the Overclocking profile I used on my Asus Rampage VI Extreme motherboard. Nvidea are also having a look at it as the Adobe support people thought it might be their driver.

#Asus intel extreme tuning utility watchdog pro#

I even re-installed Windows ( 10, Pro 64 ).Īt a loss now - any ideas or suggestions gratefully received ! The PC is overclocked but I reset the OC to standard and it was still the same. I also tried with and without GPU acceleration enabled, but the problem is the same regardless.

#Asus intel extreme tuning utility watchdog software#

I made sure the bios and all the other software on there is the latest.

#Asus intel extreme tuning utility watchdog drivers#

All of my drivers are up to date ( I even invested in Driver Easy and all of my drivers are definitely up to date. The PC is water-cooled and never gets much above 60C so not too hot. I ran memory diagnostics, disc diagnostics and I used the Intel tuning utility to stress the CPU and memory. Even streaming 4K video works flawlessly - so I believe the Video card is OK ( Asus ROG Strix 1070 GTX ) I use many other programs on my PC and they all work fine.

Since then I have updated to the latest Nvidia driver and back to 2018. The failure happens almost always within a couple of mins of starting Lightroom, but sometimes it will not start at all and other times it might go 10 or 15 mins. They tried rolling back to an earlier Nvidia Driver and to LR 2017, but it was still the same. The Adobe support guys have tried very hard to get to be bottom of this but to no avail. I not only get LR hanging, but also BSOD with 'DPC Watchdog Violation'. However, the problem is back with a vengeance. I had the same issues and seemed to be fixed for a while after I re-installed LR.